Cookware test en Display Setting Value Power limitation This enables you to limit the total power of the hob, if required, due to the circum- stances of your electrical installation. Ob- serve the regulations of the local electricity suppliers. The available settings depend on the maximum power of the hob. You can find more information on the rating plate. If the function is switched on and the hob has reached the set power limit, the required and permitted power level flashes and you can- not select a higher power level. The power is increased by 500 W with each level. – Switched off. Maximum power of the hob 1 . - 1000 W. Lowest power setting. . - 1500 W. ... - 3000 W. . - 3500 W.
- 4000 W. . - 4500 W. ... - Maximum power of the hob. Demo mode Demonstration mode for the hob: When you switch on the hob, lights up for a few seconds and the cooking zones do not heat up. - Switched on. - Switched off. 1 Cookware test You can use this function to test the quality of the cookware. → "Cookware test", Page 15 - Not suitable. - Not optimal. - Suitable. - Hob-based hood control The settings are configured based on the ex- tractor hood model. → "Overview of the hood control settings", Page 18 Restoring factory settings - Individual settings 1 . - Factory settings. 1 Factory setting 18.2 To go to the basic settings 3. Touch to access the basic settings.
a and light up as a presetting. 4. Touch repeatedly until the desired setting ap- pears. 5. Select the required setting in the settings area. 6. Touch and hold for 4 seconds. a This saves the settings. Requirement: The hob must be switched off. 1. To switch on the hob, touch . 2. Within the next 10 seconds, touch and hold for 4 seconds. Product information Display Customer service directory Production number Production number 1 Production number 2 18.3 Discarding changes to the basic settings ▶ Touch . a All changes are discarded and not saved. a The first four displays provide the product informa- tion. Touch to view the individual displays.
Cookware test 19 Cookware test The quality of the cookware has a major influence on the speed and the result of the cooking process. You can use this function to test the quality of the cook- ware. Before the test, ensure that the diameter of the cook- ware base corresponds to the diameter of the cooking zone being used. Access is via the basic settings. → Page 14 2. Call up the basic settings and select . 3. Touch the settings area. flashes in the cooking zones. a The function is switched on. a After 10 seconds, the result appears in the cooking zone displays.
19.2 Checking the result 19.1 Carrying out Cookware test You can see what the result means for the quality and speed of the cooking process in the following table. 1. At room temperature, place the cookware with ap- prox. 200 ml water in the centre of the cooking zone that best fits the base of the cookware in terms of size. 15