Water softening system en 5. To save the settings, press for 3 seconds. 3. Note: Only use special salt for dishwashers. Do not use salt tablets. Do not use table salt. Add the special salt to the dis- penser. 11.3 Special salt You can use special salt to soften water. Adding special salt If the special salt refill indicator lights up, add special salt to the dispenser for special salt just before the pro- gramme starts. The consumption of special salt depends on the water hardness. The higher the water hard- ness, the greater the consumption of special salt. ATTENTION! Detergent may damage the water softening system.
▶ Only fill the dispenser of the water Fill the dispenser right up with spe- cial salt. The water in the dis- penser is displaced and forced out. 4. Place the lid back on the dis- softening system with special dish- washer salt. Special salt for dishwashers can damage the tub due to corrosion. ▶ To make sure that any special salt penser and turn to close. 11.4 Switching off the water that escapes is washed out of the tub, add the special salt to the dis- penser for special salt immediately before the programme starts. softening system If you find the special salt refill indic- ator irritating, e.g.
when using com- bined detergents with salt replace- ment substances, you can switch the indicator off. Note To avoid damage to the appliance, only switch off the water softening system in the following cases: Ў The water hardness is max. 26 °E 1. Unscrew the lid of the dispenser for special salt and remove. 2. On initial start-up: Fill the dispenser right up with water. and you are using a combined de- tergent with salt replacement sub- stances. According to the manu- facturers, combined detergents with salt replacement substances can generally only be used up to a water hardness of 26 °E without adding special salt. 25