Chapter 22 G-Code Editor and E-CAM Editor When using Remove A Line function, please take note: Property regarding Line Start or Line End key points can use this function. Click the upper toolbar icon to export planning table data. However, the file format to export is different based on the project PLC types and cannot be in common use. To import planning table data, click the icon to import the selected files. To download slave data, users need to setup connection between ISPSoft and AS series PLCs first. The following example demonstrates by opening an E-CAM table and increase up to 8 key points.
Then, select Download Slave Data [PC=> Data Register/Servo] and choose to download to file register (FR) or servo from the pop-up window. The E-CAM area number is set to save the curve area. Here, we download 8 key points which equals to 7 curve area. When changing the start position or E-CAM area number, the system automatically calculates the ending position. Click Transfer and a pop-up window appears when transfer is complete. 22-19