Chapter 23 Wizard Tool 23.5 NTC Module Wizard 23.5.1 About the Wizard This wizard is designed for DVP08NTC-S featuring user-defined resistance/temperature table, importing/exporting csv file, downloading parameters of one or multiple modules at a time, etc. please refer to the DVP08NTC-S Operation Manual for detailed instruction. 23.5.2 Using NTC Wizard To enable this function, click “Wizard” and choose “NTC Wizard”, then a window of NTC Wizard will be opened as below shown. Options include, File: Save/Open the file, Import/Export the resistance/temperature table. Edit: Load default values, Clear the resistance/temperature table. Set:
Communication settings, RS485 direct to module or connecting to module via PLC CPU. Help: Operation instructions, Software information. A blank form would be generated after you input the initial temperature, temperature interval and temperature number. A total of eight resistance/temperature tables are available for users to fill in the form with corresponding resistance values. The curve chart is generated according to the resistance/temperature tables on the left side. Choose the target table to upload/download. 23-39