ISPSoft User Manual Upload/ Download Configuration made with HWCONFIG must be downloaded to the CPU module so as to be activated. Please make sure you’ve finished the communication settings before performing upload/ download operation. If you open HWCONFIG via ISPSoft, the communication setting of ISPSoft would be adopted by HWCONFIG. Therefore, the connection between ISPSoft and the CPU module must functions properly. Also, if the label name of CPU module is not same as the one in parameter settings, an alert message will be shown on the display.
Download parameters Click “Download” on HWCONFIG tool bar under the Communication tab or use shortcut key Ctrl+B, then the download window will pop up. 3-24 Item Description Upload Upload PLC parameters and module configurations to HWCONFIG for further configuration. Download Download parameters and configuration in HWCONFIG to PLC. Scan Scan the current connected module configurations. On-Line Mode Monitor the module status and its information. Communication Setting Set up the communication for the PLC.