Chapter 3 PLC System Configuration & Settings “Device Address” on the upper side of Process Data tab is to switch between different working modes (refer to section 12.3.2.2 in AS Series Module Manual) and display all the corresponding address ranges of CPU registers. “Address Information” displayed on the lower side is to provide all the detailed information of device addresses. Choosing the Device Take [Port 1] as an example, when this module is chosen, there’re two tabs displayed in the device information area on the right side. The main function of “Parameter” tab is to set the parameters of devices.
Users can read-write a single item or a group with the four buttons on the upper side of the window. Information of parameters including name, value, unit, default, minimum and maximum is displayed on the tab, while the greyed out field is read-only and the white field is editable. Read Only 3-67 Device Address Address Information