ISPSoft User Manual Into Error Status: Stops and go to the error mode 。 Communication Module Refreshed Priority Scan time first: only refresh the data that is different from the original ones to save scan time Synchronous Data first: scan and refresh all the data to ensure all data are synchronized. AS remote module updated method PLC Scan cycle first: update according to PLC program scan cycle Update one remote module by one scan time: update one remote module at one scan time Update all remote modules at one scan time: update all remote modules at one scan time 1601 Timer interrupt Setting Time Base Users can set the interval of triggering 1601 timer interrupt.
The function is used with Timer Interrupt 0 in the work management together. Please refer to chapter 5 for more information. 1602 Timer interrupt Setting Time Base Users can set the interval of triggering 1602 timer interrupt. The function is used with Timer Interrupt 1 in the work management together. Please refer to chapter 5 for more information. 1603 Timer interrupt Setting Time Base Users can set the interval of triggering 1603 timer interrupt. The function is used with Timer Interrupt 2 in the work management together. Please refer to chapter 5 for more information. 1604 Timer interrupt Setting Time Base Users can set the interval of triggering 1604 timer interrupt.
The function is used with Timer Interrupt 3 in the work management together. Please refer to chapter 5 for more information. 3-88