ISPSoft User Manual 3.1.4.4 System Settings – Input Point Filter Time The filter time of every input point is set on the Input Point Filter Time table. The signal will be filtered as a noise if the period of time during which an input point receives a signal less than the filter time. And users could set an appropriate filter time according to the interference state of the field environment. X Input Point Setting Mode The parameter sets whether to set the filter time of input points or to use default settings. Default Setting: Filter time is set to default value. Custom Setting: Users set the filter time of every X input point themselves.
X0.0~X0.15 Input Filter Time Setting Users could type the respective filter time of X0.0~X0.15 if Custom Setting is selected as X Input Point Setting Mode. 3-90