ISPSoft User Manual CPU (RUN STOP) When the CPU module begins to run, or when the CPU module stops running, the condition of triggering the sending of an email is met and an email will be sent. Bit Status Change If the state of a bit device specified meets a condition set, the sending of an email will be triggered and an email will be sent. For example, if X0.0 is turned from OFF to ON, the condition of triggering the sending of an email will be met. If users want to set a condition, they can click button in the following window. Device Name : Users can select a device type in the Device Name drop-down list box. Device Number & Bit :
Users can type a device address in the Device Number box. If the device type selected is X/Y, the users have to specify a bit number. State : Users can select Rising or Falling in the State drop-down list. Register Value Change If the value in a device specified meets a set condition, the sending of an email will be triggered and an email will be sent. For example, if the value in D0 is larger than 10, the condition of triggering the sending of an email will be met and an email will be sent. If users want to set a condition, they can they can click button in the following window. 3-98