ISPSoft User Manual *. Please refer to section 3.7 for more information about internal parameter settings of modules; for FROM/TO command, please see the instruction manuals for any PLC types. The information in Input and Output Device Range is auto-configured by the system, but also user-defined. Users can choose the selected row listed in Information box and then click , or type the starting address to open the setting window and click OK once finish input the address. Whether in Input and Output Device Range from Information or corresponding device D for defining the internal parameters of the module, the input device range cannot overlap.
When the setting address is in conflict, the system will auto-correct and suggest another available address based on the current input; for instance, when D3000 device is occupied by another module but is being assigned again, the system will automatically search for another available address from D3000. 3-124