ISPSoft User Manual 3.3.5.3 Ethernet - Advance: Email After users click the Ethernet - Advance tab on the top of the window, and the Email tab at the bottom of the window, they can set the mail sending function. After users select the Enable Email Sending Function checkbox, they can set the related parameters. SMTP Server : Users can set the IP address of an SMTP server. Port : Users can set a port for an SMTP server, or select the Default (25) option button. Local Email Address : Users can set the address of an actual sender. A local email address is composed of 64 characters at most. SMTP Subject :
Data typed in the SMTP Subject box will be put at the front part of the subject of every email. Only English letters, numerical digits, and special marks can be typed in the box. The subject of an email is composed of 16 characters at most. Account Identification : If users want to authenticate themselves with a user name and a password before logging in to an SMTP server, they can select the Yes option button. Account Identification Info. : Users can type a user name and a password which are used for authentication. A user name is composed of 16 characters at most, and a password is also composed of 16 characters at most.
If the parameters above are set correctly, and the computer can connect to an SMTP server normally, users can click Identification to test whether the user name and the password are correct. 3-176