ISPSoft User Manual 3.3.5.5 Ethernet - Advance: Email and Trigger Configuration After users click the Ethernet─Advance tab on the top of the window, and the Email and Trigger Configuration tab at the bottom of the window, they can set the relation between triggers for the sending of emails and receivers. Before setting the function here, the users have to click the Email tab, select the Enable Email Sending Function checkbox, click the Email Trigger tab, and set at least one trigger. Please refer to section 3.3.5.3 and section 3.3.5.4 for more information. First, type the email addresses of receivers in the Email Address column.
Eight email addresses at most can be set for the CPU module, and every email address is composed of sixty-four characters at most. Then, select triggers corresponding to receivers. If email addresses or triggers are not set, the corresponding selection positions are gray. For example, if the condition represented by trigger 1 or the condition represented by trigger 4 is met, the system will automatically send the emails to user_1@delta.com.tw . If the condition represented by trigger 2 or the condition represented by trigger 5 is met, the system will automatically send the email to user_2@delta.com.tw .
If the condition represented by trigger 1 is met, the system will automatically send the email to user_1@delta.com.tw , and user_4@delta.com.tw . 3-182