ISPSoft User Manual 4.4 Hardware Configuration After users double-click HWCONFIG in the project management area, the HWCONFIG window will appear. 4.4.1 Configuring a Module In the HWCONFIG window, there is an eight-slot backplane on which a CPU module and a power supply module are installed. However, the backplane used in this example is the four-slot backplane AHBP04M1-5A on which the digital I/O module AH16AP11R-5A is installed. If users want to replace the backplane, they can right-click the left side of the rack in the system configuration area, click Replace on the context menu, and double-click AHBP04M1-5A in the Rack Selection window.
Unfold the Digital I/O Module section on the product list, find AH16AP11R-5A , and drag the module to a vacant slot on the backplane in the system configuration area. After the module is added successfully, the 4-6