Chapter 4 Quick Start related information and the devices assigned to the module will be listed in the table at the bottom of the window. The system automatically assigns devices to a module which is added. If the devices assigned to a module do no conform to what is expected, users can click the Input/Output Device Range cell for the module, click in the cell, and type a device address in the Manual Assignment window. 4.4.2 Parameter Setting for PLCs and Modules After AH16AP11R-5A is configured, users can set the parameters in the CPU module and the parameters in the extension module. After the users double-click the CPU module or the extension module, a corresponding window will appear.
4-7