2 Sensor position adjustment [Setting Mode] (1) Click the below [Details] Button. If the angle deviation is occurred and the position is not registrated, is occurred. (2) The thermal image is displayed. It is updated at 1 s cycle. Adjust the sensor position according to the thermal image which indicates the "relationship between measurement surface and distance" described the next page. After ending position adjustment, click the [Position registration] Button to register the sensor position. And then, click the [Back] Button. Click the [Auto-range] Button to set the color scale within the Upper- and lower-limit range which is currently read.
If the color of temperature difference cannot be clearly appear and the adjustment is difficult, click the [Auto-range] Button. 16