Connections CAUTION Observe the following cautions when installing the system. Insufficient heat radiation may build up internal heat and cause a malfunction or fire hazard. ч Do not place an object that may hinder heat radiation on the system. ч Leave the spaces specified below around the cabinets of the main unit. Top panel: 50 cm or more Side panel: 10 cm or more Back panel: 10 cm or more Caution for connection Do not plug the power cord into the power outlet until all other connections are completed. Before unplugging a con- nected cord or cable, be sure to set the power key to OFF and unplug the power cord from the power outlet in advance.
Install the system so that the power outlet is easily accessible from the user, and unplug the power cord from the power outlet immediately in case of a trouble. Note that the power supply to the system is not shut down completely by simply setting the power key to OFF. To shut down the power supply completely, it is required to unplug the power cord. Malfunction of microcomputer If the system does not work properly or the display shows wrong information even when correct connections are made, reset the microcomputer referring to " Operation to reset ".
(See page 32.) Preparations Connecting to a TV with video (composite) or S-video input terminal Connecting to a TV with video (composite) or S-video input terminal Audio cord Video cord TV Rear panel example (for Australia) R L INPUT AUDIO VIDEO S VIDEO * Connect only either the video (composite) cord or the S-video cord. *S-video (Commercially available) (Except for Europe) Connecting to a TV with SCART input terminal (For Europe) Connecting to a TV with SCART input terminal (For Europe) Refer to " TV Output Select (only for Europe) " on page 17. TV Rear panel example (for Europe) INPUT SCART *SCART cable (Commercially available) Note:
Make sure the DVD player is connected directly to the TV and not to a VCR, otherwise the DVD image could be distorted by the copy protec- tion system. English 11