Table 3-10. Printing Menu (continued) C4265-90907 Printer Control Panel Menus 111 Item Values Explanation UNIT OF MEASURE=INCHES INCHES MILLIMETERS This item appears only when CONFIGURE CUSTOM PAPER=YES. Select the unit of measurement for the custom paper size. X DIMENSION= 11.7 INCHES For supported paper types, see table 1-6. This item appears only when CONFIGURE CUSTOM PAPER=YES. Select the dimension to be fed in to the printer (short edge). Y DIMENION= 17.7 INCHES For supported paper types, see table 1-6. This item appears only when CONFIGURE CUSTOM PAPER=YES. Select the other dimension (long edge). FORM=60 LINES 5 to 128 Sets vertical spacing from 5 to 128 lines for default paper size.
Press - VALUE + once to change the setting by increments of 1, or hold down - VALUE + to scroll by increments of 10. ORIENTATION= PORTRAIT PORTRAIT LANDSCAPE Determines the default orientation of print on the page. Note It is best to set the page orientation from the printer driver or software application. (Driver and software settings override control panel settings.) PCL FONT SOURCE=INTERNAL INTERNAL SOFT SLOT 1, 2, or 3 INTERNAL: Internal fonts. SOFT: Permanent soft fonts. SLOT 1, 2, or 3: Fonts stored in one of the three DIMM slots. PCL FONT NUMBER= 0 0 to 999 The printer assigns a number to each font and lists them on the PCL Font List.
The font number appears in the Font # column of the printout. PCL FONT PITCH= 10.00 0.44 to 99.99 This item might not appear, depending on the font selected. Press - VALUE + once to change setting by increments of 0.01 for pitch, or hold down - VALUE + to scroll by increments of 1.