Table 3-11. Configuration Menu (continued) 116 Chapter 3 Operating Overview C4265-90907 Item Values Explanation RAM DISK=AUTO ON OFF AUTO HP LaserJet 8150 series only. This item determines how the RAM disk is configured. This item appears only if there is no hard disk installed and the printer has at least 12 MB of memory. OFF: The RAM disk is disabled. ON: The RAM disk is enabled. Configure the amount of memory to be used with the item RAM DISK SIZE. Note If the setting is changed from OFF to ON or from OFF to AUTO, the printer will automatically reinitialize when it becomes idle. RAM DISK SIZE=xxxK 0K and up.
(This value depends on the amount of installed memory.) HP LaserJet 8150 series only. This item determines the size of the RAM disk. This item appears if RAM DISK=ON or AUTO. Press - VALUE + to change settings by increments of 100. Note This setting cannot be changed if RAM DISK=AUTO. Changing this value will cause the printer to reinitialize when it becomes idle. JAM RECOVERY= AUTO AUTO ON OFF This item determines how the printer behaves when a paper jam occurs. AUTO: The printer automatically selects the best mode for printer jam recovery (usually ON). This is the default setting. ON: The printer automatically reprints pages after a paper jam is cleared. OFF:
The printer does not reprint pages following a paper jam. Printing performance might be increased with this setting.