Table 3-18. Menu Tabs (continued) copy quality tab G Copy Mode - You may change the copy quality settings from this tab. There are three settings to choose from in Copy Mode: Photo - This mode is optimized for photo clarity. Text - This mode is optimized for text sharpness. This is the default mode. G Brightness - You may change the brightness setting from this tab. Press the left or right arrow to increase or decrease the brightness level as indicated by the slider. There are five settings for brightness. book copy tab Allows you to make a copy of an open book with a single page of output for each page of the book.
Align the spine of the book with the book markings on the flatbed paper guides. G Follow the prompts provided on the Front Panel when using this mode. G You can copy multiple pages from a book and bind them together as one job. See the "job binding tab" description for more information. job binding tab Takes multiple copies from the flatbed and binds them together as one job. This allows the user to duplex, print n-up pages, and staple jobs from the flatbed. G Follow the prompts provided on the Front Panel when using this mode. configuration tab Provides configuration settings for the HP Digital Copier. For example: G Allows you to turn on or off the audible key feedback.
G Allows you to adjust the Front Panel display contrast. 132 Chapter 3 Operating Overview C4265-90907