QuickStart Bus Terminal 1. Save station-settings in file... / Restore station-settings from file...: With these two functions you can save and restore the station your are connected to. 2. Reports: This function provides you general information about a terminal station. ◦click mapping and you get the information about the I/O address and bit size of the connected terminals ◦click pice list and you get the information about the position and number of the connected parts ◦click Terminal: Register Documentation to save the register of a terminal into a script file 3. Settings: This function provides you general information about the settings of a terminal station. ◦click Common:
Settings to do the settings for the K-bus, SPS Interface and the Process Data 1 - 4 ◦click Common: Local user-mapping to define the specific sequence of your connected terminals ◦click Fieldbus: Settings to do the specific fieldbus configuration. ◦click Controller: Settings to do the specific controller configuration (only available when a controller is connected) ◦click Process Data to do a direct configuration of your K-bus I/O process image 4. Tables: If you want to configure a terminal station directly and without menues, then click tables and a list of different tables will appear. Select the table you want to change and type in the information.
This function should be used only from advanced users! 5. digital Terminals: From here all digital terminals are listed. ◦click Channel and you will get detailed information about the process KS2000 28 Version: 6.2.0