L-4533A/L-4533AW/L-4033A/L-4033AW Operation Guide Introduction The following outlines the features added in system version x.23.x. 10 Explanation L-4533A/ L-4533AW L-4033A/L-4033AW (models with built-in Uk/Bk ink) L-4033A (models with built-in Mk/ Bk ink) Making various print settings The L-4533AW is equipped with a sensor for transparent substrates as standard. (Shipments from May 2018) U “Printing on Transparent Substrate (Sensor for Transparent Substrate)” on page 175 ✓ - - Supports laminated pouching material for substrate with a thickness of 80 to 135 μm.
U “Substrate Specifications” on page 298 ✓ - - Creating a print preset Added a feature allowing you to print preset values at the end of a print job. U “Details of preset setting contents (Preset Editing Screen)” on page 115 ✓ ✓ ✓ Added a feature called "Pause Time to Remove Waviness" that suppress wrinkles in the substrate. U “Details of Print Info. Setting Content (Print Info. Editing Screen)” on page 125 ✓ ✓ ✓ Added a print mode for Gross PW.
❏ Coated Paper, 6 pass(#0), High Duty ❏ Coated Paper, 8 pass(#10), High Duty U “Addition and compatibility of the 4 pass, 6 pass, and 8 pass modes” on page 306 ✓ - - Added "Substrate Protection Feed During Auto Maintenance" to prevent the substrate from creasing due to heat from the heater by feeding the substrate at a slight pitch during auto maintenance. U “Details of preset setting contents (Preset Editing Screen)” on page 115 ✓ ✓ - Added "Heater Control During Auto Maintenance" to control the heater during auto maintenance and prevent the substrate from creasing due to heat from the heater.
U “Details of preset setting contents (Preset Editing Screen)” on page 115 ✓ ✓ - Added a sharpening setting to sharpen the outlines of characters and images in print presets. U “Details of preset setting contents (Preset Editing Screen)” on page 115 ✓ - -