L-4733A/L-4733AW/L-4533A/L-4533AW/L-4033A/L-4033AW Printer Driver Guide Various Print Settings A Create print data in RGB mode. B Determine the RGB value for the area specified as a spot color in the print data. Adjust the RGB value for the spot color area of the image to a value that is not used in other areas. Note: ❏ Because the spot color is applied to all areas with the same RGB value, if the specified RGB value is also used in other areas, the image is not printed correctly. Do not use the same RGB value for other areas. ❏ You can use the Spot Color Support Tool to easily calculate unused RGB values.
U “Using the Spot Color Support Tool” on page 28 C Load the substrate for printing the spot color confirmation chart. Load the same type of substrate as the one used for the actual print job, with a width of at least 214 mm. D Display the preset's create/edit screen. See the following for more information on displaying the preset's create/edit screen. U Operation Guide - "Creating/Editing Presets” E Select the Spot Color and then press Edit . F Press Create New , and then press Spot Color Tool . 24