L-6534VW Operation Guide Basic Operations See the following pages for more information on creating presets. U “Creating and Editing Preset for Reverse Feeding” on page 95 C Perform printing from the print software, and then check that the print data for this print job was received on the touch panel. D Select the print job from the Job Management menu, and then press Print Settings . E Set the following, and then press OK . F Return to the Operation Status screen, move the press switch from Standby to Ready , and then start printing. Print the first copy, and then the press automatically adjusts the sensor sensitivity.
G If the first copy pauses on the unwinder side workbench, press Print to Fine-tune . Print the second copy, and then pause on the unwinder side workbench. H Check the print results and measure the eye mark pitch (a) from the right edge of the eye mark for the first copy to the right edge of the eye mark for the second copy using a ruler with a 0.1 mm scale. I Calculate the adjustment value from the measured eye mark pitch (a) and the page length of the print data. The following shows the calculation method.
150 Item Set value Distance from Right Edge of Print Job Apply to print data Reverse Feeding Position Adjustment 0 mm Item Set value Copies 1 Perform Eye Mark Verification Printing Select