L-6534VW Operation Guide Various Print Settings J If the first copy pauses on the unwinder side workbench, press Print to Fine-tune . Print the second copy, and then pause on the unwinder side workbench. K Check the print results and measure the eye mark pitch (a) from the right edge of the eye mark for the first copy to the right edge of the eye mark for the second copy using a ruler with a 0.1 mm scale. L Calculate the adjustment value from the measured eye mark pitch (a) and the page length of the print data. The following shows the calculation method.
Adjustment value = Value of measured eye mark pitch (a) - Page length of the print data M Enter the calculated adjustment value in Reverse Feeding Position Adjustment . N Press Print . O On the screen displayed, enter the number of copies, and then press Print . Start printing the color plate. This completes this section. Procedure for white plate printing A Set additional printing for white plate in a preset suitable to the type of substrate loaded, and set it as the default preset. U “Necessary settings for white plate printing” on page 176 U “Creating and Editing Print Info.” on page 89 U “Creating and Editing Preset for Printing” on page 91 182