L-6534VW Operation Guide Various Print Settings G From the rewinder side, remove the substrate the surface of which has been printed. Install a new paper core so that the rewinder side feeds counterclockwise. U “Replacing the Rewinder Side Substrate” on page 115 steps 1 to 8 H To the unwinder side, load the substrate the surface of which has been printed, removed from the rewinder side. U “Replacing the Unwinder Side Substrate” on page 99 steps 11 to 19 I Press Change Substrate from the Substrate Settings menu. J On the Change Substrate screen, set the Substrate Type for the replaced substrate. K Enter the Substrate Width , Substrate Thickness , and Paper Core Thickness , with the key pad.
L Select Clockwise as the Unwinding Direction . M Press Continue . N When feeding the splice, press Start . O Select Counterclockwise for the Rewinding Direction . P Press Continue . Q Press Continue without setting the items on the screen. Press Finish on the next screen. R To align the print start position with the rear position, move the lead eye mark on the printed surface to the position just before the eye mark sensor. (1) Open the Feed Subst tab from the Substrate Settings menu. 191