L-6534VW Operation Guide Various Print Settings B Check that the press switch is set to the Standby position. C Press Substrate Settings on the menu on the left, and then on the Feed Subst tab, set Feeding Amount to "29 m" (at a print speed of 30 m/min). The input value for Feeding Amount varies depending on the selected print speed. U “Input Value for Feeding Amount of Substrate” on page 70 D Press Start feed . E On the Loaded Substrate tab, press Adjust Eye Mark Sensor , and then adjust the eye mark sensor. See the following for more details. U “Setting Eye Marks and Eye Mark Sensor” on page 125 F In preset for printing, check that Additional Printing is set to Apply . 211