L-6534VW Operation Guide Overview of the Product 33 Letter Area Item/Explanation a Status Area Displays the operating conditions for the press. Key switch status Displays the status of the key switch. Both Ready and Standby are displayed if you change from Ready to Standby while printing. Only Standby is displayed when printing stops. Standing by Waiting to receive print data. Preparing to print Processing print data. Once preparation is complete, it switches to temperature adjustment or printing operations. Adjusting Eye Mark Sensor The sensitivity of the eye mark sensor can be adjusted.
When Perform Eye Mark Verification Printing is selected, the sensitivity for the sensor is adjusted automatically. Printing Currently printing a job. Paused Printing paused. Paused (Cannot Perform Reverse Feed) Printing paused. Does not perform reverse feed of substrate when printing resumes. Printing (Adjusting drum temperature) Printing is paused and the drum is cooling down because the drum temperature is hotter than the maximum limit. Completing print job... Processing after printing. Check Print Result Displayed when Result Check is set to Apply in the preset. You can check the contents of the printed job, or reprint the job.
Adjusting Temperature Print data processing is complete, and temperature adjustment is performed for the ink and so on. When adjustments are complete, you can start printing. Supplying Ink If an ink supply error occurs during printing, temporarily stop printing and ink supply. Printing resumes when the ink is supplied. Canceling job... Processing print job cancelation. Message Displays information messages. Error An error has occurred. U “Notification of Errors” on page 361