L-6534VW Operation Guide Overview of the Product a. Substrate feed direction b. Feeding amount for the spliced section and the margin Tape Specifications Specifications of the tape that can be set in the tape holder. Eye mark specifications 68 Width 20 to 50 mm Thickness 0.025 mm or more Internal core diameter 3 inches Rewinder diameter Up to 120 mm Eye Mark for Reverse Feeding Eye mark for additional printing Position Front Surface and rear supported Size Feed direction: from 5 mm to 10 mm Paper width direction: 5 mm or more Feed direction: from 5 mm to 10 mm Paper width direction:
5 mm or more Color Black, White The brightness of the mark must be sufficiently different from the base color of the substrate and the liner color for clear film Black, White The brightness of the mark must be sufficiently different from the base color of the substrate and the liner color for clear film Minimum pitch 30 mm However, when the substrate width is less than 120 mm, the minimum pitch differs in single-ply film. U “Eye mark pitch (interval) when printing on single-ply films” on page 411 30 mm However, when the substrate width is less than 200 mm, the minimum pitch differs in single-ply film. U “Eye mark pitch (interval) when printing on single-ply films” on page 411