L-6534VW Operation Guide Basic Operations Basic Operations Basic Workflow The following outlines the basic workflow. Startup inspection Print 85 Contents Reference Start the press. U “Starting up the Press and Startup Inspection” on page 75 Perform startup inspections. U “Starting up the Press and Startup Inspection” on page 75 U “Maintenance” on page 238 U “Cleaning Nozzles” on page 152 Create the print data. U “Creating Print Data” on page 87 Create Preset for Printing according to the substrate used and the printing method. U “Creating Preset for Printing/Print Info.” on page 89 U “Various Print Settings” on page 158 Create Preset for Reverse Feeding.
U “Creating Preset for Reverse Feeding” on page 94 Load the substrate used for printing to the unwinder side. U “Replacing the Unwinder Side Substrate” on page 99 Prepare to wind up the printed substrate. U “Replacing the Rewinder Side Substrate” on page 115 Set for the substrate. U “Setting after Replacing the Substrate (Eye Mark for Reverse Feeding: Use)” on page 121 U “Setting after Replacing the Substrate (Eye Mark for Reverse Feeding: Do Not Use)” on page 124 Use SurePress Print Plug-in for Adobe Illustrator or RIP software to send the print data to the press.
U Adobe Illustrator Output Plug-In Guide U Manuals of your RIP software U “Start Printing” on page 134 Check the job settings or order of printing in the Job Management screen. U “Start Printing” on page 134 Move the press switch from Standby to Ready, and start printing. U “Start Printing” on page 134