4. Motion Control Instruction 4.6.41. SET Explanation of the instruction: SET is used to set one single bit device to On status. When EN of the instruction is on, Q is on; as EN is off, Q is still on . Explanation of input and output parameter of the instruction: 4.6.42. RESET Explanation of the instruction: RESET is used to reset one single bit device. When EN of the instruction is on, Q is reset to Off state; as EN is off, Q status keeps unchanged. Explanation of input and output parameter of the instruction: 4-144 DVP-MC operating manual API Setting instruction Controller SET 168 10MC11T Parameter Data Available Explanation name type device EN “SET” is executed as “EN” turns on.
BOOL M,I,Q, constant Q The output bit Q is set to ON status as the instruction is executed. BOOL M,Q API Reset instruction Controller RESET 169 10MC11T Parameter Data Available Explanation name type device EN “RESET” is executed as “EN” turns on. BOOL M,I,Q, constant Q The output bit Q is reset when the instruction is executed. BOOL M,Q