4. Motion Control Instruction 4.6.46. ZRSTM Explanation of the instruction: ZRSTM is used to reset multiple continuous bit devices. When EN is on, the bit devices with S1 as the starting device are reset and the length of the reset bit devices is specified by S2; When EN is off, the status of the bit devices is unchanged. If the length specified by S2 exceeds maximum 64, it is counted as 64 and the part above 64 is invalid. Explanation of input and output parameter of the instruction : 4-148 DVP-MC operating manual API Reset one zone of bit devices Controller ZRSTM 173 10MC11T Parameter Data Available Explanation name type device EN “ZRSTM” is executed as “EN” turns on.
BOOL M,I,Q, constant S1 The starting bit device reset BOOL M,Q S2 Specify the quantity of the bit device; the max value of S2 is 64. UINT Constant, D