cardiagn.com Last Modified: 4-30-2014 6.6 A Doc ID: RM000001BI2001X Model Year: 2006 Model: LX470 Prod Date Range: [05/2005 - ] Title: SUSPENSION: REAR COIL SPRING: REMOVAL; 2006 MY LX470 [05/2005 - ] REMOVAL 1. DRAIN ACTIVE HEIGHT CONTROL SUSPENSION FLUID 2. REMOVE REAR WHEEL Torque: 131 N·m {1,340 kgf·cm, 97ft·lbf} 3. SUPPORT REAR AXLE HOUSING WITH JACK 4. REMOVE REAR SHOCK ABSORBER ASSEMBLY 5. DISCONNECT REAR STABILIZER BRACKET (a) Remove the 4 bolts and disconnect the 2 stabilizer bar brackets. Torque: 18 N·m {185 kgf·cm, 13ft·lbf} 6. DISCONNECT REAR LATERAL CONTROL ROD ASSEMBLY (a) Remove the nut, washer and bolt, and disconnect the lateral control rod. Torque:
150 N·m {1,530 kgf·cm, 111ft·lbf} HINT: At the time of installation, please refer to the following items. Replace the used nut with a new one. After stabilizing the suspension, torque the nut. 7. DISCONNECT REAR AXLE BREATHER HOSE SUB-ASSEMBLY 8. REMOVE REAR COIL SPRING (a) Begin to lower the axle housing. NOTICE: Be careful not to snap the brake line and parking brake cable. (b) While lowering the axle housing, remove the coil spring and insulator. At the time of installation, please refer to the following items. If the coil spring end is not in the correct position, reinstall the coil spring. (c) Remove the bolt and follow spring from the frame. Torque: 28 N·m {290 kgf·cm, 21ft·lbf}