INTERIOR COMPONENT Press the window lock button. The indicator in the button turns on to show that the windows on the passengers ’ side are deactivated. vehicle software gets upgraded. If this occurs, initialize the windows via the driver's door control panel as follows: Note! When the windows on the passengers ’ side are moving, they will stop moving immediately after the window lock button is pressed. VESPER 1 Switch the ignition on. 2Pull up the controls to raise the windows to the top and hold for a few seconds, then release the controls. Caution!
Initialization must be carried out to ensure the anti-pinch function works properly and must be done for each window using the window controls on each door. Anti-pinch function The anti-pinch function is activated when the window is closed by automatic operation. If the window is obstructed while it is closing, it will be immediately opened. Warning! If the auto up/down function of the window still does not work properly after initialization, contact a Lynk & Co Center for inspection. ■ Never leave children unattended in the vehicle. They may activate the window controls accidentally and be injured by a moving window.
■ At the moment before the window is completely closed, if something gets stuck, the anti-pinch function may not work. ■ Make sure that all occupants have their hands, etc. inside the vehicle while the vehicle is in motion and before closing the windows. ■ To ensure your safety and comfort when driving at high speed, close the windows before speeding up. Panorama sunroof You can use the controls on the overhead console to control the opening, closing and lifting of the panorama roof. The panorama sunroof is provided with sun blind to provide protection in the strong sunlight.
Window Initialization The auto lifting/lowering function of the window will not work properly if the battery has been temporarily disconnected or the 135