STARTING AND DRIVING During overtaking, you may need to have the vehicle speed higher than the set speed limit. You can fully depress the accelerator pedal until the the speed limit value flashes, at which time the speed limit is temporarily disabled. You can then overtake the other vehicle. Always use a safe speed when overtaking a vehicle. Once your speed drops below the speed limit, the speed limit value stops flashing and the speed limit is automatically resumed.
Traffic Sign Recognition (TSR) (if equipped) TSR uses the road speed limit information obtained by the windshield camera and the speed limit information from navigation to remind you through the instrument cluster that whether you violate the traffic regulations. The system can help you to keep a legal speed and obey local traffic restrictions. VESPER Warning! Resume speed limit from standby mode ■ TSR does not function in all situations and is only intended to provide supplementary information. Please read the information about the limitations of the windshield camera for drive assistance systems. ■ You are always responsible for driving safely and observing traffic regulations.
Recognizable traffic signs You can reactivate the speed limit function in the following ways: ■ Press the reset button on the left keyboard of the steering wheel. ■ Press the setting key on the left keyboard of the steering wheel. Examples of traffic signs 184