IN CASE OF EMERGENCY Note! VESPER In certain conditions, the towing eyelet may be used to pull the vehicle onto a flatbed tow truck. □ The vehicle's position and ground clearance determine if it can be pulled up onto a flatbed tow truck using the towing eyelet. □ If the angle of the tow truck ’ s ramp is too steep or the ground clearance under the vehicle is insufficient, damage could occur by attempting to pull the vehicle using the towing eyelet. □ If necessary, lift the vehicle using the tow truck ’ s lifting device. Recovering the vehicle If your vehicle is stuck in sand, snow, or mud. keep the procedures below in mind:
3Begin by screwing the towing eyelet in place by hand, then use the wheel wrench to securely tighten it. After use, unscrew the towing eyelet and put it back in the storage location. Refit the cover into place. Note! 1 Make sure the area in front and behind of the vehicle is clear of obstructions. 2Turn the steering wheel right and left to clear an area around the front wheels. 3Engage in D or R gear to rock the vehicle slowly forward and rearward. 4If the vehicle cannot be freed after a few tries, contact a professional towing service. Place wooden blocks, stones or equivalent under the front wheels to help increase the traction force.
Safety chain devices must be used for any form of towing and national/provincial and local regulations shall be complied with. 237