MAINTENANCE AND SERVICE Information about maintenance and service recognition capability of the camera. Please troubleshoot in the following order: VESPER Storing Vehicles The vehicle should be stored in a cool, ventilated, clean and dry environment. If the vehicle is parked in a closed and humid environment for a long time, it will accelerate the rust and aging of vehicle parts. Please follow the recommendations and requirements in the "Warranty and Maintenance Manual" to perform regular maintenance on the vehicle in time. 1 Check if there are warning/indicator messages on the instrument cluster. ■ If so, please understand the meaning of these symbols.
For details, please refer to the User Manual. The corresponding measures can be found in the instrument cluster. ■ If not, go to Step 2. Breaking-in period In order to extend the service life of your vehicle and obtain better vehicle economy, the following matters shall be observed during the initial 2,000 km driving period: 2Check if any system functions are reduced or limited. ■ If so, take appropriate measures to resolve the problem (open hood, unbuckled seat belt, low temperature, etc). ■ If not, go to Step 3. ■ Do not run the engine at high speed in N gear. ■ Avoid accelerating with full throttle when starting and in any gear position.
■ Avoid low speed or super high speed for a long time when the vehicle is fully loaded. ■ Avoid emergency braking during driving. ■ Vehicle should be driven on flat roads and avoid muddy or sandy roads. ■ Avoid driving at a fixed speed or engine speed for a long time. 3Try the given solution(s) corresponding to the listed problems below. ■ Vehicle emergency start , please refer to the (p. ) . ■ Flat tire , please refer to the (p. ) . ■ Battery power too low , please refer to the (p. ) . ■ Engine overheat , please refer to the If the vehicle overheats(p. 243) . ■ Low intensity lights , please refer to the (p. ) .
Basic troubleshooting guidelines If a problem occurs in your vehicle it is usually indicated by symbols and/or messages on the instrument cluster. In some cases where there is no problem with the vehicle, external factors may limit system functions, e.g. heavy fog, snow or dense fog, affecting the 4Check the fuse/relay that protects the system/components. 5If the problem(s) cannot be resolved by repeating the process above, please contact a Lynk & Co Center for inspection. 247