Lynk & Co — Basic troubleshooting guidelines

MAINTENANCE AND SERVICE 3Loosen 1 locking clip securing the middle right cover. 2Then, at a height of about 30cm, apply a little force to allow the hood to fall down and lock. VESPER Warning! ■ Before driving, make sure that the hood is completely closed and locked. Otherwise, the unlocked hood may suddenly open and block the line of sight, causing an accident. ■ Before closing the hood, make sure there are no obstructions present in the hood opening and no gloves, rags or any combustible materials left in the engine compartment. Failure to do this may cause a fire and/or personal injury. Caution!

■ If the hood is not tightly closed, it needs to be re-opened, and the closing force should be slightly increased. ■ The closed hood should be flush with the adjacent body, and the door opening indicator on the instrument cluster should be off. 4Lift and remove the engine compartment cover. Remove the middle right cover. Installing the engine compartment cover Install the engine compartment cover in the reverse order. Caution! After installing the engine compartment cover, make sure the installation is secure. Engine oil Engine oil has a great influence on engine performance and life.

To ensure normal engine performance and service life, special attention must be paid to engine oil condition. Following these simple and important steps will help protect your vehicle: Closing the hood ■ Use engine oil that meets the appropriate specifications and of the correct viscosity level. ■ Check the engine oil level regularly and maintain the correct oil level. 1 Pull down the hood and overcome the supporting force from the inflatable support rod. 253