MAINTENANCE AND SERVICE Wiper blades advisable to protect the paint with a coat of wax at least once a year. First place the wiper blades in the service position , please refer to the Wiper blades(p. 259) , then clean them with a clean cloth dipped in mild soapy water recommended by Lynk & Co. VESPER Polishing Deactivate the auto wiping function before activating the wiper blade service position or using an automatic car wash. Otherwise, damage could be caused by unexpected wiper activation. Warning! When there are flow marks, coarse grains, scratches on the surface of the car or the paint has lost its surface gloss, it can be polished to make the car paint bright and smooth.
Polish first with a polish and then wax with liquid or solid wax. Follow the instructions on the packaging carefully. Wheel rims Note! Use a soft brush and a strong spray of water for cleaning the wheel rims. Only use rim cleaning detergent recommended by Lynk & Co. □ Do not polish or wax the vehicle in direct sunlight. □ Avoid waxing and polishing on plastic and rubber. □ Do not use agents that contain abrasives. □ When waxing, if the paint surface is damaged, stop waxing immediately and repair. □ After waxing, check carefully to remove the remaining wax on license plates, lights, door edges, etc.
Sealing strip Clean the dust on the surface of sealing strip regularly when washing the vehicle. Waxing and polishing Corrosion protection The vehicle has effective protection against corrosion. But regular inspections and maintenance are required to reduce the risk of corrosion. Waxing Regular waxing protects the paint surface and helps retain a new vehicle appearance. It is time to apply a good coat of wax when water no longer forms droplets and rolls off the clean paintwork. Even if a wax solution is used regularly in the car wash, it is ■ Wash and wax your vehicle regularly to keep the vehicle clean. ■ Always check for minor damage to the paint and repair it as soon as possible. 269