INSTRUMENT Warning and malfunction messages appear in the instrument cluster. Certain messages are accompanied by an audible signal and/or an illuminated symbol. Seatbelt Reminder : This warning light illuminates in red if the passenger ’ s seatbelt is unfastened. Please fasten your seatbelt, otherwise personal injury may be caused. If the warning light remains on after the seatbelt is fastened, it indicates that the seatbelt is faulty. Please stop the vehicle in a safe place immediately and contact a Lynk & Co Center. VESPER Warning! When relevant warning lights are illuminated on the instrument cluster, the driver should pay attention to them.
Failure to handle the noted condition(s) could result in vehicle damage or personal injury. Abnormal Tire Pressure : If the warning light remains on, the it indicates that the tire pressure is abnormal, and relevant warning information is prompted on the instrument cluster. If the warning light flashes for about 1 minute and then stays on, there is a dTPMS failure. Please stop the vehicle at a safe place immediately and contact a Lynk & Co Center. Red Warning Symbol: When a red warning symbol is illuminated, it indicates that some alarm or failure information is hidden. You can view alarm or failure information in the settings interface , please refer to the (p. ) . Engine Oil Pressure Low :
If the warning light remains on, it indicates that the engine oil pressure is too low. Please stop the vehicle in a safe place immediately and contact a Lynk & Co Center. Adaptive Cruise Control (if equipped) Fault : If the warning light remains on, it indicates that ACC is faulty. Please stop the vehicle in a safe place immediately and contact a Lynk & Co Center. Motor Hot : If the warning light remains on, it indicates that the motor is hot. Please stop the vehicle in a safe place immediately and contact a Lynk & Co Center. Gasoline Particle Filter (GPF) Fault : If the warning light remains on, it indicates that the GPF status is abnormal.
Please stop the vehicle in a safe place immediately and contact a Lynk & Co Center. Coolant Temperature : If the warning light remains on and in red, it indicates that the engine is hot. Please stop the vehicle in a safe place immediately and contact a Lynk & Co Center. Battery Charging Fault: If the warning light is on continuously, it means that the battery is faulty or the generator cannot supply power to the vehicle. Stop the vehicle in a safe place immediately and contact a Lynk & Co Center. 75