Lynkco — 3.1 Terms and definitions

BS EN 55035:2017 CISPR 35:2016 3.1.20 launched common mode current asymmetric mode current produced by internal circuitry and appearing at a wired network port of the EUT Note 1 to entry: Measurement of the launched common mode current requires the EUT port to be loaded by a perfectly balanced termination.

3.1.21 LNB low noise block converter which amplifies and converts broadcast satellite frequencies to frequencies usable by a satellite receiver 3.1.22 local AE AE located within the measurement or test area 3.1.23 mode of operation set of operational states of all functions of an EUT during a test or measurement 3.1.24 multimedia equipment MME equipment that is information technology equipment ( 3.1.19 ), audio equipment ( 3.1.6 ), video equipment ( 3.1.33 ) , broadcast receiver equipment (3.1.7) , entertainment lighting control equipment (3.1.14) or a combinations of these 3.1.25 optical fibre port port at which an optical fibre is connected to an equipment 3.1.26 outdoor unit of home satellite receiving systems outdoor unit which typically consists of a reflecting surface (or antenna) and an LNB Note 1 to entry:

This excludes the intermediate frequency amplifier and the demodulator included in the indoor receiver. 3.1.27 port physical interface through which electromagnetic energy enters or leaves the EUT 5