HOW TO READ THIS MANUAL Contents omitted in this manual Though the following jobs are omitted in the explanation in this manual, they should be conducted in actual work: 1) Jacking up and lifting 2) Cleaning and washing of removed parts as required 3) Visual inspection 3. Definition of Terms [NOTICE]: Instruction whose negligence is very likely to cause an accident. Always observe it. Standard: Allowable range for inspection and adjustment. Limit: The maximum or minimum value that must be satisfied during inspection or adjustment. 4. Abbreviations 00-10 82E-5 – 98E-5 SERIES Abbreviation Meaning Abbreviation Meaning Ass’y assembly T.D.C. top dead center Sub-Ass’y sub-assembly B.D.C.
bottom dead center A.T.D.C. after top dead center OS oversize B.T.D.C. before top dead center US undersize STD Standard rpm revolutions per minute IN Intake HP Output (horsepower) EX Exhaust T Bolt/nut tightening torque kW Output (SI unit)