9. STARTING MOTOR 12) Screw M4 (3) 13) Bearing retainer 14) Gear case Remove screw M4, and the bearing retainer and clutch ass’y can be removed. 15) Pinion stopper clip Remove the bearing retainer at the edge and the bearing, and shift the pinion stopper toward the pinion. Use a plain screwdriver and pry to remove the pinion stopper clip. 16) Pinion stopper 17) Return spring 18) Pinion shaft 19) Clutch Ass’y Remove the pinion stopper clip. The pinion stopper, return spring, pinion shaft and bear- ing retainer can be removed. Disassembly is completed now. 9-8 82E-5 – 98E-5 SERIES