4. DISASSEMBLY, INSPECTION AND REASSEMBLY OF ENGINES 4.2.4 Servicing points Point 1 [Disassemble] Loosen the mounting bolt while supporting the alternator. Do not tilt the alternator toward the cylinder block in haste since it may damage the alterna- tor or pinch a finger. [Reassemble] The belt deflection shall be checked according to 2.2.2. in Chapter2. [Reassemble] Replace the belt with a new one if cracked, worn or damaged. Carefully prevent the belt from being smeared with oil or grease. Point 2 [Reassemble] Check the thermostat function. (See 3.9 in Chapter 3 for the check procedure.) Point 3 [Reassemble] Replace the fuel filter element with a new one.
[Disassemble] Cover the fuel pipe opening with tape to prevent intrusion of foreign matters. Point 4 [Reassemble] Replace the oil filter with a new one. After fully tightening the filter manually, retighten it with a filter wrench (see 11.1-6 in Chapter 11) by 3/4 turn. Point 5 [Disassemble] Cover the fuel injection pipe and pump inlets and outlets with tape or the like to prevent intru- sion of foreign matters. 82E-5 – 98E-5 SERIES 4-15