▶ Do not use the appliance with damp hands. ▶ Never operate a damaged appliance. ▶ Never let the power cord come into contact with hot parts or be Avoiding material damage en dragged over sharp edges. ▶ Never place the appliance on or near hot surfaces. ▶ After switching off, wait until the drive has come to a complete standstill. ▶ Keep hands, hair, clothing and utensils away from rotating parts. ▶ Never touch the edges of the blades with bare hands. ▶ Process hot food carefully. ▶ Leave boiling food to cool down to at least 70 °C before pro- cessing. ▶ Follow the cleaning instructions. ▶ Clean surfaces which come in contact with food before each use.
Avoiding material damage Controls Controls Avoiding material damage Avoiding material damage ▶ Do not operate the appliance at no-load. ▶ Never use the blender jug in the mi- Controls Speed setting For continuous speed adjustment. Set the rotary selector between ● (lowest speed) and 12 (highest speed). On button To use the appliance at the preselected speed. Turbo button To use the appliance at maximum speed. Note: The appliance remains switched on as long as one of the buttons is pressed. crowave or oven. Overview Overview Overview → Fig.
1 Overload protection Overload protection Overload protection If the appliance switches itself off during use, the overload protection device has been activated. Remove the mains plug and leave the appli- ance to cool down for approx. 1 hour to de- activate the overload protection device. Note: If the fault cannot be eliminated, please contact customer service. 1 Depending on the model 2 separate operating instructions Note: If an accessory is not included in the scope of supply, it can be ordered from customer service.
Printed on 100% recycled paper 13 1 Speed setting 2 On button 3 Turbo button 4 Release buttons 5 Blender foot 6 Lid1 7 Plastic blender jug1 8 Whisk1 2 9 Universal cutter L1 2 10 Universal cutter XL1 2