Mar.2006 MC-808 Changing the export region 1. Power-on the MC-808. 2. Press [SYSTEM] to enter System mode. 3. Hold down [SHIFT] and press keyboard pad [14]. 4. Use [CURSOR ] to select [Version]. 5. Hold down [SCALE MEASURE] and press the part buttons in the order of [1], [7], [8], [9]. 6. You will enter the Startup page. Hold down [SHIFT] and press part button [14]. The following indication will appear in the LCD display. fig.14-factory-reset1.eps_68 7. Turn the [VALUE dial] or use [INC][DEC] to select either “100,” “117,” or “230/240” as the voltage appropriate for the export region. 8. Press [ENTER], and a factory reset will be executed. fig.15-factory-reset2.eps_68 9.
When the factory reset is completed, the LCD display will show the following. fig.16-power-off.eps_68 10. Turn the MC-808 power off, and then on again. Checking the export region The order of pattern USER 003 and following will differ depending on the export region. After you power-on the MC-808, press [CURSOR >] twice to select the USER 003 pattern, and note the export region indicated by the pattern name that appears, as listed below. • “100”: Get It • “117”: My Only Tap • “230/240”: Melodic Trance 2 29