▶ Never let the power cord come into contact with hot parts or be Avoiding material damage en dragged over sharp edges. ▶ Never place the appliance on or near hot surfaces. ▶ After switching off, wait until the drive has come to a complete standstill. ▶ Keep hands, hair, clothing and utensils away from rotating parts. ▶ Never leave the appliance switched on if the power supply is in- terrupted. The appliance will automatically start up again follow- ing the interruption in the power supply. ▶ Process hot food carefully. ▶ Leave boiling food to cool down to at least 70 °C before pro- cessing. ▶ Follow the cleaning instructions. ▶ Clean surfaces which come in contact with food before each use.
Avoiding material damage Note: If an accessory is not included in the scope of supply, it can be ordered from customer service. Avoiding material damage Avoiding material damage ▶ Do not operate the appliance at no-load. ▶ Never use the blender jug in the mi- crowave or oven. Operating elements Operating elements Overview Overview Operating elements Ejector button For removing the tools. Note: The Ejector button cannot be actu- ated unless the switch is in the position. Release buttons For removing the accessories from the rear aperture. Overview → Fig.
1 the tools Switch Symbol Function switched off lowest speed highest speed Instantaneous switching (highest speed) press to the left and hold in place Note: When the rear aperture is open, the selector switch will not function between levels and . 1 Depending on the model 2 separate operating instructions Printed on 100% recycled paper 11 1 Switch 2 Ejector button 3 Release buttons 4 Apertures (with lock) for inserting 5 Cable clip1 6 Self-closing rear aperture 7 „Fine Creamer“ beating whisks 8 Kneading hooks 9 Lid1 10 Plastic blender jug1 11 High-speed hand blender1 2 12 Universal cutter1 2