EN 2. General Introduction to xLogic Overview Expandable up to 16 linked IO expansion modules reaching 282 I/O points in maximum xLogic is a universal logic module made by Rievtech. Optional RS232, RS485 and Ethernet connectivity xLogic is a compact, expandable CPU that can replace mini Multiple channels analogue inputs available with 0- PLC, multiple timers, relays and counters. Bridging the gap 10 VDC, PT100 & 0/4….20mA. between a timing relay and a low-end PLC.
Each CPU has Default Real Time Clock (RTC) and Summer/Winter a real-time clock and calendar and supports optional timer available expansion I/O modules to meet your control and Real Time Clock (RTC) at 25 °C kept for 20 days monitoring applications needs. Data adjustments can be 4 channels high-speed counting done via the onboard keypad and LCD display, or with xLogicsoft. It can be either DIN-rail or panel mounted, Pre-configured standard functions, e.g.
on/ off-delays, pulse relay and softkey depending upon the needs of your application, and it is 2 PWM channels (10kHz maximum) available in 120/240 VAC as well as 12/24 VDC versions, Retentive memory capability (Not applicable to PR-6 and it is an ideal solution for relay replacement & PR-12-E series CPU) applications, simple control applications such as building Isolated RS232 and USB programming cables and parking lot lighting, managing automatic lighting, Program capability up to access control, watering systems, pump control, or 1024 function blocks for PR-18, PR-24, PR-12- ventilation systems in factory, and home automation and N, PR-18-N & PR-26-N applications in which cost is a primary design issue.
512 function blocks for PR-12 & EXM Feature Highlights Mounting via modular 35mm DIN rail or screw fixed 64 function blocks for PR-6 & PR-12-E 4-lines, 16-characters per line, backlight display. mounting plate Multiple value display and input via keypad and LCD On-line monitor capability (Free SCADA software for display. all series xLogic) 70 kinds of function Blocks can be used in a circuit Datalogging program in maximum A range of analogue signals available (0 to 10 VDC, Standard Modbus RTU/ASCII/TCP communication 0/4 to 20 mA and PT100 probe inputs and 0 to10VDC It’s optional for xLogic to act as a slave or master in protocol supported.
and 0/4 to 20mA outputs) a Modbus communication network. Low cost Easily connect to other factory devices such as touch screens by RS232 cable and/or RS485 module. Some of the things xLogic can do for you CAN BUS protocol-based expansion modules (PR- The xLogic Micro PLC provides solutions for commercial, 18/PR-24 series CPU) industrial, building and domestic applications such as Programmable Relay ● User Manual for ELC, EXM and PR Series 17 2020 v6.0 ● © Rievtech Co.,