Introducing the OmniBook Setting Up Windows To set up the OmniBook for the first time C A U T I O N Use only the HP adapter model F1454A with this product. Using any other ac adapter could damage the OmniBook and may void your warranty. Refer to the warranty statement for your product. 1. Connect the power cord to the ac adapter, then plug the cord into an ac outlet. The indicator light on the ac adapter shines when powered. 2. Connect the ac adapter to the OmniBook’s left side, as shown. 3. Press the blue power button. The Windows 95 or Windows NT Setup program starts automatically. 4. Follow the instructions as they appear on the screen.
During setup, you will be prompted to accept the License Agreement and enter the Product ID (printed on the Certificate of Authenticity on the Microsoft Windows manual). If you are prompted to set up a user account and password, you can either set up the account, or press ESC to skip this step. Note If you installed Windows NT 4.0, see page 6-20 to install Advanced Power Management (APM). 1-9