Making Connections Using OmniBook Plug-In Modules To insert or remove a CD C A U T I O N Do not remove a CD while the OmniBook is actively reading data. Otherwise, the OmniBook could stop responding and you could lose data. 1. Press the button on the face of the CD-ROM drive. 2. If one is present, remove the cardboard shipping insert. 3. Place the CD into the drive (label facing up) and gently press down to seat the CD on the spindle. --or-- Remove the CD. 4. Close the door to the drive. If you lose power to the OmniBook, or if you have removed the CD-ROM module from the OmniBook, you can manually open the CD-ROM drive to remove a CD.
• Carefully, insert a straightened paper clip into the recessed hole on the front of the CD-ROM drive. 4-6