Making Connections Using OmniBook Plug-In Modules To insert or remove a DVD or a CD C A U T I O N Do not remove a DVD or CD while the OmniBook is actively reading data. Otherwise, the OmniBook could stop responding and you could lose data. 1. Press the button on the face of the drive tray. If the cardboard packing insert is present, be sure to remove it. 2. Place the DVD or CD into the drive (label facing up) and gently press down to seat the disk on the spindle. –or– Remove the disk. 3. Slide the DVD tray back into the module to close it. If you lose power to the OmniBook, or if you have removed the module from the OmniBook, you can manually open the drive to remove a disk.
Insert a straightened paper clip into the recessed hole on the front of the drive, as shown. 4-5